Una trave in acciaio con una sezione trasversale quadrata è caricata con una forza assiale e un carico distribuito. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.
Una trave in acciaio caricata assialmente con una sezione trasversale quadrata è bloccata a un'estremità e supportata da una molla all'altra. Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.
Uno sbalzo con fibre che non corrono in direzione dell'asse della trave da una sezione trasversale quadrata con pressione di trazione. Calculate the maximum deflection.
Un blocco tridimensionale in materiale elastico-plastico è fissato ad entrambe le estremità. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Determina l'inflessione massima di quattro colonne fissate nella parte inferiore e collegate da un blocco rigido nella parte superiore. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Un blocco tridimensionale in materiale elastico-plastico con indurimento è fissato su entrambe le estremità. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
Quattro colonne sono fissate nella parte inferiore e collegate da un blocco rigido nella parte superiore. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.